|
For the safety of your horses
Monitor your horses, pets, or livestock while trailering them
Helpful for aligning trailer ball and hitch.
Can be a barn cam or foaling monitor too !!
It is so easy !
Runs on battery power
5 minute installation
No tools required
Very Affordable price
$259.00 a set, including everything
Shipping & handling are included
30 Day money back guarantee
Call 1-888-227-688 to order your Trailer Eyes
Satisfying reception quality
on the monitor is promised
With optional adapters,
it can be easily converted to a barn cam or foaling monitor.
As horsemen ourselves, we know how worrisome it is while trailering our horses.
After years of developing & testing, we believe Trailer Eyes TE-0408 wireless
monitoring system is the most user friendly device on the market
to monitor valued cargo in trailers.
There is no need to drill holes in your trailer.
Can be set up in 5 minutes. No tools required.
Here is how it works-
To set up the camera in your trailer--
1. Use the clamping base to mount the camera. The clamping
base can be clamped on any pole or board which is less than
2 ¼” in diameter or thick. Choose the mounting spot and tighten
the clip bolt on the clamping base.
2. Loosen the tilt lock knob, adjust the camera , point it in the
direction where you wish to monitor, and tighten the tilt lock knob.
3. Insert a 9V battery. Turn the On/Off switch to the ON setting. A single
9 V battery can operate the camera up to 5 hours in day time, 3 hours
under night vision mode. ( Rechargeable 9 V Lithium Ion battery
are available.)
The camera is set!
To set up the monitor in your pulling vehicles--
1. Mount the goose-neck suction mount to the windshield,
dashboard, or window.
2. Attach the monitor to the goose-neck suction mount.
3. Attach the antenna connector to the monitor.
4. Open the car door and mount the booster antenna (magnet base)
on the side of your vehicle. Run the wire between the antenna
and the monitor through the car door and the car frame,
not through the car window and door frame.
5. Plug the power jack into the monitor, and then plug the 12V car
lighter adapter into the lighter jack.
6. Turn the monitor on.
7. Adjust the position of the monitor, the antenna wire, and the
power wire to avoid interference with the driver.
Voilà ! The object of observation is in your monitor now.
We are confident to say
Use it once
you'll want it for every trip
|